PVC XLPE Insulated Power Cable applies to electrical power transmission and distribution lines with AC rated voltage Uo/ U up to and including 0.6/1kV.
For outdoor and indoor installation in damp and wet locations, laid directly in the ground where excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined laying,as well as in locations susceptible to sliding.
The Main type of power cable YJV22/YJV32 means:
YJ: XLPE insulation
V: PVC insulation
V: PVC sheath
22: Galvanized steel tape armoring
32: Galvanized steel wire armoring
Conductor: Plain circular stranded copper conductor, conforms to IEC 60228 class 2
Insulation: PVC, XLPE
Inner Covering: PVC
Armoring: Steel Wire, Steel Tape, Aluminum Wire at request
Sheath: PVC according to IEC 60502, black
Note: Insulation color as per standards or at request
Features of single core 25mm2 Power Cable
Insulation :Black XLPE
Insulation thickness: 0.7mm
Sheath Thickness: 1.4mm
Approx. Cable Weight: 294 kg/km
Overall diameter of cable: 10.7mm
Max D.C resistance at 20C: 0.727
Used as power distribution and transmission line at rated voltage 0.6/1kV.
Suitable for burying in ground, laying down wells and under water. Able to bear certain axis pulling force.
International: IEC 60502-1, IEC 60228;
Other standards such as ASTM BS,DIN and ICEA upon request
Rated voltage: 0.6 / 1 kV
Max. Conductor Temp.: normal (70°C), short circuit no more than 5 s (160°C when section-area below 300mm2, 140°C when section-area above 300mm2)
Min. Ambient Temp.: 0°C, after installation and only when cable is in a fixed position
Min. Bending Radius: 20 x cable O.D