1.Aluminum Conductor Alloy Reinforced (ACAR) cable has aluminum wires concentrically stranded around a Aluminum Alloy core.

2.Aluminum wire is 1350 H-19, the same material with AAC, ACSR outer layer conductor wires. Aluminum Alloy core is high strength Aluminum-Magnesium-Silicon 6201-T81 53% IACS Alloy.

3.ACAR has a lower maintenance revenue, using the same tower and pole as ACSR does. ACAR is excellent choice where lower price, higher DC current carrying capacity, longer operating time are desired in line design.

Installation and application: 

ACAR cable can be installed in air，Is is recommended that the installation instructions indicated by the local electric code, or any equipment, be followed, so that the safe guarding of persons and the integrity of the product will not be affected by deficiencies in the installation.

CONSTRUCTION

1.1350 H-19 wires concentrically stranded around a 6201-T81 aluminum alloy core.

2.Some designs have 1350 aluminum wires and 6201 alloy wires intercalated in the same layer.

3.Aluminum wire / Alloy Core Strands: 4/3, 12/7, 18/19, 30/7, 54/7, 42/19, 24/37, 54/37, 72/19

Property:

4.Core has less DC resistance compared with ACSR, less energy loss in power transmission.

5.Good corrosion resistance from Aluminum based material, and no Bimetallic corrosion concern.

6.No Hysteresis loss and eddy current loss, energy-saving choice.

7.Almost the same price with ACSR in same length per kilometer.

8.Less maintenance cost in revenue.

Standard of Production:

1.ASTM B524 Standard, refer to the following specification

B-230 Aluminum Wire 1350-H 19 for Electrical Purpose

B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purpose

B-524 Concentric-lay-stranded Aluminum Conductor, Aluminum Alloy Reinforced ACAR 1350/6201

2.IEC 61089 Standard

3. Other International Standard

Our Advantage:

1.Free sample and OEM 

2.Manufacture since 1984;

3.Certified by ISO,CCC,OHSAS, Bureau Veritas and etc ;

4.Equipped with advanced testing equipment

ACAR (Aluminum conductor aluminum alloy reinforced)Used as overhead transmission cable and as primary,secondary distribution . A good strength-to-weight ratio makes ACAR applicable where both ampacity and strength are prime considerations in line design; for equal weight, ACAR offers higher strength and ampacity than ACSR.Heat Resistance Aluminum Alloy Strand is suitable for substations,power plants and other large-current transmission,saving engineering investment.